Gently pull each of the onboard detergent tanks out of its storage position and fill each tank with detergent (Fig. 24). Do not make changes to the nozzle while the trigger is engaged. Doing so could result in damage to the pressure washer or sun joe spx 3000 injury to the user. Make sure the safety lock is down and in its original position (Fig. 20), then press the trigger for a few seconds until water flow is steady. This will allow air to escape and discharge any residual pressure in the hose.
Not all pressure washers are built alike—some are powered by gas, while others use electricity. We tested this electrical power washer to see how it handled our outdoor cleaning tasks. Electric pressure washer generates up to 2030 PSI of water pressure and 1.76 GPM of water flow. While we wouldn’t recommend this for cleaning your Aston Martin, plenty of contractors and general truck owners pull into the driveway at the end of the day with their vehicles caked in dirt.
Read, understand, and follow all instructions on the machine before attempting to assemble and operate. This machine is not suitable for connection to the potable water mains. Do not use acids, bases, solvents, or any flammable material in this product. These substances can cause physical injuries to the operator and irreversible damage to the machine.
The Sun Joe Pressure Washer is about the size of a household vacuum cleaner. I assembled it in westinghouse pressure washers about 20 minutes with just a screwdriver. It comes with everything you need to get started.
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. Double insulation – In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Replacement parts for a double-insulated appliance must be identical to the parts they replace.
Please be sure to register your unit beforehand to speed up this process. Certain products may require a serial number, typically found on the decal affixed to the housing or guard of your product. Turn off the water supply and squeeze the trigger to depressurize the unit. Failure to do so could result in personal injury due to discharge of high-pressure water. Disconnect the high-pressure hose connection on the trigger gun handle. Turn the switch to the OFF position and unplug the power cord from the outlet.