And, with the recently released SDK for third parties to build EVO II Pro mapping capabilities into their own mission planning software suites, this platform shows the most promise. A mechanical shutter exposes each pixel of a sensor simultaneously, whereas a linear rolling shutter exposes phantom 4 each pixel row one at a time. This ultimately will lead to motion blur, especially with slower shutter missions on ideal overcast days. Third-party solutions like Litchi handle waypoint missions extremely well, and MapsMadeEasy MapPilot provides a terrain following solution.
The DJI dji fly Pro V2.0, announced in May 2018, improves on the existing Phantom 4 Pro with an OcuSync transmission system, improved ESCs and low-noise propellers. Our team will be happy to provide pricing and answer any questions you might have. DroneNerds.com is the largest UAV dealer in the United States and we are DJI’s largest and most experienced authorized service center in the United States.
If you have any questions or need more information, please contact us anytime. It has a 1-inch CMOS sensor that shoots 20 megapixel stills and can capture up to 11.6 stops of dynamic range. Greater dynamic range means the camera’s sensors will be better able to balance and resolve differences between light and dark. This is a common problem in aerial footage, when you often have a brightly lit sky against dark terrain below.
Photos will be captured as JPEG in the same resolution as the video recording. The Federal Aviation Administration requires every DJI Phantom operator to register before flying. Aircraft weighing over .55 lbs must have a compliant label for identification and carry a Certificate of Registration .
But DJI added a slow-motion option capturing 1080p at 120fps and it has improved the lens so there’s less chromatic aberration and better corner sharpness. It, too, is not removable, which means it can’t simply be upgraded or replaced. DJI streamlined the body and gimbal design, putting more of it inside the body. It has more powerful motors and propellers that lock on with a simple push and twist instead of the endless spinning required to get the old props on and off.
The Obstacle Sensing System can be enabled in ActiveTrack, TapFly, dji drones Normal mode and all Intelligent Navigation functions.