Has a warranty — can help in communication with customer service if needed. Works without air leakage — so that you do not have to pump air every couple of hours. Has a cover — a must-have to retain the temperature. Holds temperature — to prevent the water from cooling down too quickly. RMA — is a process of returning a product during its warranty to receive a refund or repair. By checking this box, you confirm that you have read and are agreeing to our terms of use regarding the storage of the data submitted through this form.
The manual walks through the process in easy and simple steps. The clip down, child proof inflatable cover is foil lined to minimise heat loss. Of course running the same specification heater and pump on both tubs does have some implications, especially for the larger tub.
Speaking of maintenance and cleaning, you may get the intex baby float Hot Tub Maintenance Kit that you may use in any Intex hot tubs even on a SimpleSpa. Some customers report an E-90 error code similar to other Intex hot tubs. The Ultimate Spa experience is right at your fingertips. No matter where you are, control all spa functions from your phone or tablet. Program the PureSpa use and maintenance remotely with wifi connectivity. The only problem that we’ve seen reported is when people try to set one up in freezing weather.
It takes about 45 minutes to fill, but then you have to wait 24 hours to let it reach the peak temperature of 104˚. There is a vast selection of smaller hot tubs available, but only three models are really worth their salt. Floor insulation is very important in the winter months.
Make sure you fully drain the tub and let it dry completely before bundling it up to store it. The best thing about an inflatable hot tub when compared to a classic one is that it can be stored intex purespa between uses. Pay close attention to the seating and headrests on any inflatable hot tub you’re considering. Inflatable hot tubs use jets to create the soothing experience you’re looking for.
When getting near the bottom of the water, remove the plug on the bottom to send off last bits of water from the tub. Warm up the tub to the proper temperature (we like the Intex max of 104′, but your temp may vary). This generally takes 1-2 hours, depending on your water pressure and distance. If the spa is going in a basement or on a concrete floor, this is much less of an issue. Another great thing about the intex frame pool Greywood Deluxe is its size which can fit up to 6 persons. It does not come with seats included so you have to buy them separately unless you want to seat on your tub’s floor indefinitely.