Here are the threads I looked over having an intex pump myself and the same question. In this case bonding is connecting the components of a pool together with an electrically conductive path. In the case of pools that path is #8 solid bare copper wire (#6 wire if you are in Canada eh). The goal of the bonding everything together is to keep all the parts of the grid at the same electrical potential .
You’ve got standard pools, which typically have either steel walls or tear-resistant PVC walls supported by steel frames. There are also inflatable options, which are usually made of the same PVC material but without a steel frame. Inflatable pools tend to be the most portable and affordable.
This often means that you will likely need some work to make the site more level. The most difficult part of setting up either kind of pool is leveling out the site where you want to locate the pool. Even a small incline will cause the water in your pool to be deeper on the lower side of the pool.
For this article, she looked for pools that were easy for homeowners to set up and maintain that also provided enough space to enjoy pool games. It is one of the more expensive models but will last for years with proper use and storage. It is also big enough to host epic summer pool parties without requiring permanent installation. For a more budget-friendly option, consider the round Bestway Steel Pro Above Ground Backyard Frame Pool. It is also sizeable and has a steel frame that is durable.
Did you ever figure out the proper way to bond this type of pool? Everyone saying bond in 4 places for these pools don’t seem to understand its hardware. Some localities require all pools to be intex baby float bonded whether they’re meant to be or not. There have been several people who have bolted a bonding to four places around the frame and bonded the pool and equipment just like a regular pool.
If don’t want to futz around with attaching the cleaner to your pool, make things a little easier with a rechargeable manual vacuum. It uses internal power instead of your pool’s filter system to clean. Push it along the bottom and the debris gets sucked up into a filter bag inside the cleaner. It’s a Dustbuster for your pool, without the ’70s haircut.